Publications & Patents
Peer Reviewed SCI Journal Publications
81.
80. H. Ryu*, Y. Chen*, A. Chen*, H. Moeinnia*, O. Nemir, S. Khan, and W. S. Kim, Flexible and Printed Electronics (2024). Link: https://singdirect.iopscience.iop.org/article/10.1088/2058-8585/ad7e36/meta
79. H. Moeinnia* and W. S. Kim, npj Flexible Electronics (2024). Link: https://www.nature.com/articles/s41528-024-00309-z
78. D. Agron* and W. S. Kim, Analytical Chemistry (2024). Link: https://pubs.acs.org/doi/full/10.1021/acs.analchem.3c05190
77. T. Kim*, H. Moeinnia*, and W. S. Kim, Materials & Design (2023). Link: https://www.sciencedirect.com/science/article/pii/S0264127523007475
76. H. Su*, H. Moeinnia* and W. S. Kim, 3D Printed Electromyography Sensing Systems Advanced Sensor Research (2023). Link:
75. H. Su*, T. H. Kim*, H. Moeinnia*, and W.S. Kim, A 3D Printed Portable EMG Wristband for the Quantitative Detection of Finger Motion IEEE Sensors Journal in press (2023). Link:
74. A. Hassanpour*, T. Kim*, and W.S. Kim, Enhanced RF Response of 3D Printed Wireless LC Sensors using Dielectrics with High Permittivity Flexible and Printed Electronics, 8, pp. 015013 (2023). Link:
73. A. Hassanpour*, and W.S. Kim, Printed Wireless Sensing Devices using Radio Frequency Communication ACS Applied Electronic Materials, 5, pp. 1-10, (2023). Link:
72. C. Bao*, H. Moeinnia*, and W.S. Kim, 3D Structural Electronics via Multi-directional Robot 3D Printing Advanced Materials Technologies, pp. 2201349 (2022). Link:
71. T. Kim*, A. Hassanpour*, and W.S. Kim, 3D Designed Battery-free Wireless Origami Pressure Sensor Microsystems & Nanoengineering 8, pp. 120 (2022). Link:
70. W. Lee*, J. Fritsch*, A. Maqsood, S. Liu, T. Bourassa, R. Calara, and W.S. Kim, Adaptive 3D Printing for In Situ Adjustment of Mechanical Properties Advanced Intelligent Systems, pp. 2200229 (2022). Link:
69. H. Moeinnia*, H. Su*, and W.S. Kim, Novel Grasping Mechanisms of 3D-Printed Prosthetic Hands Advanced Intelligent Systems, pp. 2200189 (2022). Link:
68. C. Bao*, H. Su*, and W.S. Kim, A 3D Printed Portable Neuromorphic System IEEE Sensors Letters, 6, pp. 5500203 (2022). Link: https://www.sciencedirect.com/science/article/pii/S2589004222003893
67. C. Bao*, T. H. Kim*, and W.S. Kim, 3D Integrated Neuromorphic Humanoid Hand by Multi-axis Robot 3D Printing iScience, 25, pp. 104119 (2022). Link:
66. T. H. Kim, W. S. Kim, Involvement of frontline clinicians in healthcare technology development: Lessons learned from a ventilator project, Health and Technology, 12, pp. 597 (2022). Link:
65. T. H. Kim*, C. Bao*, and W.S. Kim, 3D printed leech-inspired origami dry electrodes for electrophysiology sensing robots npj Flexible Electronics, 6, pp. 5 (2022). Link:
64. W. Heng, G. Yang, W.S. Kim, and K. Xu, Emerging wearable flexible sensors for sweat analysis Bio-Design and Manufacturing, 5, pp.64-84 (2021). Link:
63. T. H. Kim*, X. Min*, and W.S. Kim, 3D architectured air sensing tubes for a portable mechanical ventilator Flexible and Printed Electronics, 6, pp. 035010 (2021). Link:
62. D. Baker*, and W.S. Kim, Highly Conductive 3D Printable Materials for Structural Electronics ACS Applied Electronic Materials, 3, pp. 2423-2433 (2021). Link:
61. W.S. Kim and J. Paik, Soft Bionic Sensors and Actuators Advanced Intelligent Systems, 3, pp. 2100003 (2021). Link:
60. M. Kaur*, T.H. Kim*, and W.S. Kim, New Frontiers in 3D Structural Sensing Robots Advanced Materials, 33, pp. 2002534 (2021). featured as a frontispiece. Link:
59. T. Kim*, J. Vanloo, and W.S. Kim, 3D Origami Sensing Robots for Cooperative Healthcare monitoring Advanced Materials Technologies, 6, pp. 202000938 (2021). featured as inside back cover. Link:
58. C . Bao*, S.K Seol, and W.S. Kim, 3D Integrated Neuromorphic System Sensors and Actuators B: Chemicals, 332, pp. 129527 (2021). Link:
57. X. Min*, and W.S. Kim, An Artificial Xylem Chip: A 3D Printed Vertical Digital Microfluidic Platform Langmuir, 36, pp. 14841 (2020). Link:
56. C. Bao*, and W.S. Kim, Highly Sensitive and Selective Printed Solid-state Ion Sensors Advanced Engineering Materials, 22, pp. 2000116 (2020). Link:
55. S.H. Park*, G. Goodall, and W.S. Kim, Perspective on 3D-designed Supercapacitors Materials & Design, 193, pp. 108797 (2020). Link:
54. X. Min*, and W.S. Kim, Beyond High Voltage in the Digital Microfluidic Devices for an Integrated Portable Sensing Systems Microfluidics and Nanofluidics, 23, pp. 127 (2019). Link:
53. T. Kim*, M. Kaur*, and W.S. Kim, Assistive Robot Systems: Humanoid Robot Actuation through Precise Chemical Sensing Signals Advanced Materials Technologies, 4, pp. 1900570 (2019). featured as a front cover. Link:
52. M. Kaur*, and W.S. Kim, Toward a Smart Compliant Robotic Gripper Equipped with 3D-Designed Cellular Fingers Advanced Intelligent Systems, 1, pp. 1900019 (2019). featured as a back cover. Link:
51. X. Min*, C. Bao*, and W.S. Kim, Additively Manufactured Digital Microfluidic Platforms for Ion-selective Sensing ACS Sensors, 4, pp. 918-923 (2019). Link:
50. C. Bao*, M. Kaur*, and W.S. Kim, Toward a Highly Selective Saliva Sensors using Printed Field Effect Transistors Sensors and Actuators B: Chemical, 285, pp. 186-192 (2019). Link:
49. T. Kim*, C. Bao*, M. Hausmann, G. Siqueira, T. Zimmermann, and W.S. Kim, 3D Printed Disposable Wireless Ion Sensors with Biocompatible Cellulose Composites Advanced Electronic Materials, 5, pp. 1800778 (2019). featured as a front cover. Link:
48. S. Park*, M. Kaur*, D. Yun, and W.S. Kim, Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices Langmuir, 34, pp. 10897-10904 (2018). Link:
47. Y. Dong*, C. Bao*, and W.S. Kim, Sustainable Additive Manufacturing of Printed Circuit Boards Joule (Cell press), 2, pp. 579-582 (2018). Link:
46. T. Kim*, and W.S. Kim, Nozzle Shape Guided Filler Orientation in 3D Printed Photo-curable Nanocom簫posites Scientific Reports, 8, pp. 3805 (2018). Link:
45. Y. Dong*, X. Min*, and W.S. Kim, A Fully 3D-printed PCB-based Electro-chemical Sensor System IEEE Sensors Journal, 18, pp.2959-2966 (2018). Link:
44. M. Kaur*, T. G. Yun, S. M. Han, E. L. Thomas and W.S. Kim, 3D Printed Stretching-dominated Micro-trusses Materials & Design, 134, pp. 272-280 (2017). Link:
43. K. Andersen*, Y. Dong*, and W.S. Kim, Highly Conductive 3D Printing with Low-melting Alloy Filament Advanced Engineering Materials, 19, pp. 1700301 (2017). Link:
42. J. Park*, T. Kim* and W.S. Kim, Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics Scientific Reports, 7, pp. 3246 (2017). Link:
41. H. Hariri, J. Kim*, W. S. Kim, L. Frechette, and P. Masson, Performance Validation of Printed Strain Sensors for Active Control of Intelligent Tires Applied Acoustics, 123, pp. 73-84 (2017). Link:
40. L. Jian*, T. Kim*, J. Park*, J. Wang, and W.S. Kim, High Performance 3D Printed Electronics Using Electrodeless Plated Copper AIP Advances, 7, pp. 035314 (2017). Link:
39. M. Kaur*, S. Han, and W.S. Kim, Three-dimensionally printed cellular architecture materials: perspectives on fabrication, material advances, and applications MRS Communications, 7, pp. 8-19 (2017). Link:
38. M. Abrar*, Y. Dong*, P. Lee, and W.S. Kim, Bendable Electro-chemical Lactate Sensor with Printed Silver Nano Ink Scientific Reports, 6, pp. 30565 (2016). Link:
37. H. Jang*, and W.S. Kim, Shear-induced Dry Transfer of Reduced Graphene Oxide Thin Film via Roll-to-roll Printing Applied Physics Letters, 108, pp.091601 (2016). Link:
36. J. Kim*, and W.S. Kim, A Paired Stretchable Printed Sensor System for Ambulatory Blood Pressure Monitoring Sensors & Actuators: A. Physical, 238, pp. 329-336 (2016). Link:
35. J. Park*, S. Robinovitch, and W.S. Kim, A Wireless Wristband Accelerometer for Monitoring of Rubber Band Exercise IEEE Sensors Journal, 16, pp.1143-1150 (2016). Link:
34. L. Motha, J. Kim*, and W.S. Kim, Instrumented Rubber Insole for Plantar Pressure Sensing Organic Electronics, 23, pp. 82-86 (2015). Link:
33. R. Kazemzadeh*, K. Andersen*, L. Motha, and W.S. Kim, Highly Sensitive Pressure Sensor with Reduced Graphene Oxide IEEE Electron Device Letters, 36, pp. 180-182 (2015). Link:
32. J. Kim*, and W.S. Kim, Stretching Silver: Printed Metallic Nano Inks in Stretchable Conductor Applications IEEE Nanotechnology Magazine, 8 (4), pp. 6-13 (2014). Link:
31. J. Kim*, Z. Wang, and W.S. Kim, Stretchable RFID for Strain Sensing with Silver Nano Ink IEEE Sensors Journal, 14 (12), pp. 4395-4401 (2014). Link:
30. Y. Zhang*, and W.S. Kim, Highly Sensitive Flexible Printed Accelerometer System for Monitoring Vital Signs Soft Robotics, 1 (2), pp. 132-135 (2014). Link:
29. H. Son*, J. Park*, J. Huang, J. Kim*, Y. Nam and W.S. Kim, Flexible Fibrous Piezo-electric Sensors on Printed Silver Electrodes IEEE Transactions on Nanotechnology, 13, pp.709-713 (2014). Link:
28. J. Park*, M. Rezaei*, and W.S. Kim, Sustained Percolation in Stretched Silver Nanowire Networks for Stretchable Inter-Connection Applications Advanced Engineering Materials, 16, pp. 905-908 (2014). Link:
27. J. Kim*, J. Jong and W.S. Kim, Repeatedly Bendable Paper Touch Pad via Direct Stamping of Silver Nanoink With Pressure-Induced Low-Temperature Annealing IEEE Trans on Nanotechnology, 12, pp. 1139-1143 (2013). Link:
26. Y. Zhang*, C. Lei, and W.S. Kim, Design-optimized Membrane-based Flexible Paper Accelerometer with Silver Nano Ink Applied Physics Letters, 103, pp.073304 (2013). Link:
25. T. Rai, P. Dantes, B. Bahreyni and W.S. Kim, Stretchable RF Antenna with Silver Nanowires IEEE Electron Device Letters, 34, pp.544-546 (2013). Link:
24. J. Kim*, Tina Ng, and W.S. Kim, Highly Sensitive Tactile Sensor Controlled by OTFT, Applied Physics Letter, 101, pp. 103308 (2012). Link:
23. J. Kim*, K. Wubs, B.S. Bae, and W.S. Kim, Direct Stamping of Silver Nanoparticles toward Residue-free Thick Electrode Science and Technology of Advanced Materials, 13, pp. 035004 (2012). Link:
22. J. Kim*, Pinyen Lin, and W.S. Kim, Mechanically Robust Super-oleophobic Stamp for Direct Stamping of Silver Nanoparticle Ink, Thin Solid Films, 520, pp. 4339-4343 (2012). Link:
21. T. Akter*, J. Joseph, and W. Kim, Fabrication of sensitivity tunable flexible force sensor via spray coating of graphite ink, IEEE Electronic Device Letters, 33, pp. 902-904 (2012). Link:
20. T. Akter*, and W.S. Kim, Reversibly Stretchable Transparent Conductive Coatings of Spray-deposited Silver Nanowires, ACS Applied Materials & Interfaces, 4, pp. 1855-1859 (2012). Link:
19. J. Kim*, B. Lew, and W.S. Kim, Facile Fabrication of Super-hydrophobic Nano-needle Arrays via Breath Figures Method, Nanoscale Research Letters, 6, pp. 616 (2011). Link:
18. W.S. Kim, L. Jia, and E.L. Thomas, Hierarchically Ordered Topographic Patterns via Plasmonic Mask Photolithography, Advanced Materials, 21, pp. 1921-1926 (2009). Link:
17. A. Moujoud, H.J. Kim, S.H. Kang, G.J. Oh, W.S. Kim, B.S. Bae, and S.Y. Shin, Double component long period waveguide grating filter in sol-gel material, Optics Express, 15, pp. 15147-15153 (2007). Link:
16. W.S. Kim, M.G. Kim, A.H. Ahn, B.S. Bae, and C.B. Park, Protein Micro-Patterning on Bi-Functional Organic-Inorganic Sol-Gel Hybrid Materials, Langmuir, 23, pp. 4732-4736 (2007). Link:
15. W.S. Kim, D.G. Choi, and B.S. Bae, Ultraviolet-nanoimprint of 40 nm Scale Patterns Using Functionally Modified Fluorinated Hybrid Materials, Nanotechnology, 17, pp. 3319-3324 (2006). Link:
14. W.S. Kim, J.H. Jin, and B.S. Bae, Low Adhesive Force of Fluorinated Sol-gel Hybrid Materials for Easy De-moulding in a UV-based Nano-Imprint Process, Nanotechnology, 17, pp. 1212-1216 (2006). Link:
13. A. Moujoud, W.S. Kim, B.S. Bae, and S.Y. Shin, Thermally-stable Optical Characteristics of Sol-gel Hybrid Material Films, Applied Physics Letters, 88, 101916 (2006). Link:
12. D.J. Kang, W.S. Kim, and B.S. Bae, Direct Photo-fabrication of Refractive Index Modulated Multimode Optical Waveguide Using Photosensitive Sol-gel Hybrid Materials, Applied Physics Letters, 87, 221106 (2005). Link:
11. D.G. Choi, J.H. Jeong, Y.S. Shim, E.S. Lee, W.S. Kim, and B.S. Bae, Fluorinated Organic- Inorganic Hybrid Mold as a New Stamp for Nanoimprint and Soft Lithography, Langmuir, 21, pp. 9390-9392 (2005). Link:
10. W.S. Kim, K.B. Yoon, and B.S. Bae, Nanopatterning of Photonic Crystal with Photocurable High Refractive Index Material by UV-based Nanoimprint Technique, J Materials Chemistry, 15, pp. 4535-4539 (2005). Link:
9. W.S. Kim, K.S. Kim, Y.J. Eo, K.B. Yoon, and B.S. Bae, Synthesis of the fluorinated hybrid material for UV embossing of large core optical waveguide structure, Journal of Materials Chemistry, 15, pp. 465-469 (2005). Link:
8. C.G. Choi, W.S. Kim and B.S Bae, Low Dielectric Constant Organic-Inorganic Hybride Materials by Non-Hydrolytic Sol-Gel Method, Electronic Materials Letters, 1, pp 87-90 (2005). Link:
7. W.S. Kim, K.-S. Kim, Y.-C. Kim, and B.-S. Bae, Thermowetting Embossing Nano Imprinting (TENI) of Organic-Inorganic Hybrid Materials, Thin Solid Films, 476[1], pp. 181-184 (2005). Link:
6. E.-S. Kang, W.S. Kim, K.-S. Kim, and B.-S. Bae, Modification of Thermo-Optic Characteristics of Sol-Gel Inorganic-Organic Hybrid Materials, Journal of Sol-Gel Science and Technology, 32, pp. 277-280 (2004). Link:
5. E.-S. Kang, W.S. Kim, K.-S. Kim, and B.-S. Bae, Reducing the thermal dependence of silica-based arrayed-waveguide grating using inorganic-organic hybrid materials, IEEE Photonics Technology Letters, 16[12], pp. 2625-2627 (2004). Link:
4. W.S. Kim, J.-H. Lee, S.-Y. Shin, B.-S. Bae, and Y.-C. Kim, Fabrication of Ridge Waveguides by UV Embossing and Stamping of Sol-Gel Hybrid Materials, IEEE Photonics Technology Letters, 16[8], pp. 1888-1890 (2004). Link:
3. W.S. Kim, R. Houbertz, T.-H. Lee, and B.-S. Bae, Effect of Photo initiator on Photopolymerization of Inorganic-Organic Hybrid Polymers (ORMOCER), J Polymer Science Part B: Polymer Physics, 42, pp. 1979-1986 (2004). Link:
2. R. Houbertz, W.S. Kim, G. Domann, J. Schulz, B. Olsowski, and L. Frolich, Impact of photo-initiators on the photopolymerization and the optical properties of inorganic-organic hybrid polymers, Applied Physics Letters, 84[7], pp. 1105-1107 (2004). Link:
1. J.U. Park, W.S. Kim, and B.S. Bae, Photoinduced Low Refractive Index in a Photosensitive Organic-Inorganic Hybrid Material, Journal of Materials Chemistry, 13, pp. 738 (2003). Link: